Need help?Do you have a question about the Mad Catz CAT9 and is the answer not in the manual?
General| Brand | Mad Catz |
|---|---|
| Model | CAT9 |
| Category | Video Game Controller |
| Analog Sticks | 2 |
| Vibration Feedback | Yes |
| Platform Compatibility | PC |
| Connectivity | Wired |
Pair the controller by pressing the pairing key for 2 seconds; the LED indicator will flash until connected.
Enter Android gamepad mode by pressing 'X+home' for 2 seconds. LED4 flashes until connection.
Enter Apple MFI mode by pressing 'B+home' for 2 seconds. LED3 flashes until connection.
Gamepad charges via USB cable. Switch between Xinput/Directinput using '+' and '-' keys for 3 seconds.
Activate turbo firing by pressing a button plus the turbo key. Clear functions by holding the turbo key.
Monitor battery status via LED indicators: flashing for low power/charging, LED4 on for charging complete.
Change colors, activate breathing or rocker modes, and adjust brightness using the light key and other buttons.
Gamepad enters sleep mode after 5 minutes of inactivity. Press home for 3 seconds to disconnect and enter sleep.
Program back keys (MR, ML) for single button functions or macros using specific button combinations.
Enhance or reduce the motor vibration effect using dedicated buttons on the controller's back.
To Next Page