Maestro MR795 - Setting Delayed Start

11
the cooking hours and “-” to set the cooking minutes.
4) Press the button “Start” to conrm the set value and start cooking. The program starts its
execution.
To cancel the wrong function, click the button “Cancel”.
Changing the cooking temperature
All the programs of the multicooker are pre-factory settings for the cooking temperature;
however you can change the cooking temperature at your discretion before cooking.
1) After putting the products into multicooker, close the lid and turn on the appliance.
2) Press the button “Menu” to select the desired program, the preset temperature of the
selected program will reect at the display.
Double-click the button “Settings”, the cooking temperature icon will light up on the display
will. on the left side
Press the button “+” to increase the temperature, and the button “-” to decrease the
cooking temperature. The range of regulation the cooking temperature is 35 ~ 180 ℃ .
Changing the temperature and cooking time is also possible when the multicooker is
switched on and running in one of the previously selected programs.
Press the button “Setup”, the cooking time icon will ash on the display. Press the buttons
“+” and “-” to adjust the cooking time. Then, second pressing of the button “setting” again
on the display will light up the icon of cooking temperature, touching the buttons “+” and
“-” adjust the cooking temperature. The selected settings will be conrmed automatically
within 3 seconds.
The function «Delayed Start»
The multicooker allows to program the start delay of the cooking
1 After putting the products into the multicooker, close the lid and turn on the appliance.
2) Press the button “Menu” to select the desired program, on the display shows the preset
time of the selected program.
3) Press the button “Settings”» on the display shows a ashing time in hours and minutes
00:30.
Press the “+” button to set the delayed start hours, and “-” to select the minutes.
Press the button “Start” to conrm. Two indicators will ash on the display, the delay time
starts counting down, when the selected program of cooking will start. When the program
EN