12
starts running at the end of the delay time, the “Delayed Start” indicator will turn o.
Note: do not forget to activate the delay by pressing the “Start” button, otherwise the delay
and the program itself will not start.
The function «Maintaining heat»
At the end of the cooking, all programs (except “Yogurt”) automatically go into the mode of
“Maintaining heat”, this is indicated by the button’s backlighting:
The temperature for keeping warm is 70 ℃. To turn o the heating, press the same button
Heating / Cancel » (3/Fig 2).
When the heating icon turns o on the display - this will indicate that the multicooker is not
in the heat-holding mode.
The action facility canceling
Any action or program can be canceled by pressing the button «Cancel» (3/ Fig 2), the
multicooker will enter into standby mode.
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Do not use abrasive and aggressive detergents, solvents, alkaline, metal objects and
wash-ups.
- Never submerge electric drive, its mains cable and plug in water or other liquid, do not
wash the drive in water or in a dish washing machine.
Cleaning of multicooker’s parts
- Wipe the housing rst with a slight wet then with soft dry cloth. Let it dry completely.
The bowl of the multicooker must be cleaned after each use. You can use a dishwashing
liquid and a soft cloth. Do not use abrasive cleaners! You can not use force to clean the
bowl. In case of severe contamination ll it with water and leave for a while, then gently
wash it.
To Next Page
Loading...
