Mafell UVA 115 E - Troubleshooting; Grinding Material; Special Accessories; Exploded Drawing and Spare Parts List

-19-
7 Troubleshooting
Danger
Determining the causes for existing defects and eliminating these always requires
increased attention and caution. Pull the mains plug beforehand!
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the MAFELL customer service.
Defect
Cause
Elimination
Machine cannot be switched on
No mains voltage
Check power supply
Carbon brushes worn
Take the machine to a MAFELL
customer service shop
8 Grinding material
Order No.
Price
Code
Description
Design
Qty
093410
99
Abrasive grid Abranet 115x230, 20 pieces
Grain 60
1
093411
99
Abrasive grid Abranet 115x230, 35 pieces
Grain 80
1
093412
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 100
1
093413
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 120
1
093414
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 150
1
093415
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 180
1
093416
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 240
1
093417
99
Abrasive grid Abranet 115x230, 40 pieces
Grain 320
1
093418
99
Abrasive grid Abranet, delta 105 3 x 3 pieces each
P80, P120,
P180
1
9 Special accessories
- Universal filter bags UFB-1, 5 pieces
Order No. 205570
- Interface pad UVA-SA 10
Order No. 093420
- Sheet of abrasive mesh Abranet® Delta 105
Order No. 093418
- Interface pad UVA-SA D Delta 105
Order No. 093421
10 Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com