Mafell UVA 115 E - Technical Data; Emissions; Scope of Supply

-15-
2.3 Technical data
Universal motor, radio and TV interference suppressed
230 V~, 50 Hz
Input power
450 W
Strokes at idling speed
4000 – 24000 strokes / min
Strokes at normal load
3000 – 18000 strokes / min
Sanding stroke
2.6 mm (3/32 in.)
Sanding pad
223 /112 mm (8 11/16 x 4 3/8 in.)
Abrasive – hook and loop fastening
230 /115 mm (9 1/16 x 4 1/2 in.)
Sanding paper - clamp fastening
280 /115 mm (11 x 4 1/2 in.)
Hose connector diameter
35 mm (1 3/8 in.)
Weight without mains cable
2,6 kg
2.4 Emissions
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
L
PA
= 83 dB (A)
Uncertainty
K
PA
= 3,0 dB (A)
Sound power level
L
PA
= 94 dB (A)
Uncertainty
K
PA
= 3,0 dB (A)
The noise measurement was recorded using the tool included in the standard equipment.
2.4.2 Vibration specifications
Noise emission values determined according to EN 62841-2-4 :
at the main handle smaller than 2.5 m/s
2
at the front handle 3.6 m/s
2
The measuring inaccuracy K is 1.5 m/s
2
2.5 Scope of supply
Orbital Sander UVA 115 E complete with:
1 delta sanding plate with Velcro
1 abrasive grid Abranet kit, P 60 – P 320
1 protective layer 115x230 10-hole
1 abrasive grid Abranet Delta 105 – P 120