C & D Flashlight
ML Rev.1 8/03
3
421-000-391
LAMP TEST - STEP 3
Bad Lamp - If the lamp is bad the meter
setting will not change and will stay at 1.
BATTERY TEST - STEP 1
• Black Probe in COM port
• Red Probe in VΩmA port
• Dial set at 2
BATTERY TEST - STEP 2
PROBE PLACEMENT
• The Red Probe goes on the positive
battery button
• The Black Probe goes on the flat
negative end
BATTERY TEST - STEP 3
METER READING
• Meter should read 1.40 or higher for a
good battery
To Next Page
Loading...
