MB197UC, -BK, -BL, -FBK, -GRAY, -LG, -OR, -WT, -YE Rev. 12/22/15
OWNER'S MANUAL
MB197UC, -BK, -BL, -FBK,
-GRAY, -LG, -OR, -WT, -YE
3 DRAWER
DELUXE UTILITY CART
• Read and follow all instructions in User's Manual
• Do not load carts beyond rated capacity:
Maximum Total Net Load 500-Lbs
Top and Bottom Shelf 150-Lbs each
Top Two Drawers 100-Lbs each
Bottom Drawer 200-Lbs
Sliding Work Surface (closed) 200-Lbs
Sliding Work Surface (fully extended) 50-Lbs
PLEASE NOTE: Loading cart beyond rated capacity may cause
structural damage to the cart as well as personal and /or
property damage Please educate your customers to the
"dangers of overloading"
• Lock lid and drawers before moving • Apply brake on locking
casters anytime cart is in place • Do not pull cart Push from
handle on end to move • Units can tip or fall causing damage or
personal injury • Cart is designed to roll easily on at surfaces
and should not be used on uneven or inclined surfaces • Do not
open more than one loaded drawer at a time • Do not stand on
or step in drawers • Keep children away from unit • Wear gloves
when lifting edges • This product may contain one or more
chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm Wash hands
thoroughly after handling • Failure to heed these warnings may
result in personal injury and/or property damage
WARNING
© 2015 Mac Tools
T40 Torx Bolt (M8) 32 pcs. (1A)
T40 Torx Bolt (M8) 8pcs. (1B)
Hex Bolt, Washer, and Lock
Washer (M8 x 20) 16 pcs. (8)
HARDWARE SPECIFICATIONS
TOOLS NEEDED FOR ASSEMBLY:
• T40 Torx Driver or Torx Key
• 13mm Combination Wrench
• Socket or Universal Socket
• 4" Extension and Ratchet
To Next Page
Need help?
General
