Magellan Back-up Camera User Manual

Magellan Wireless Backup Camera
Installation Instructions
The following installation instructions are a general guide and
may not apply to all vehicles. We strongly recommend you
have a qualied technician install this device. Improper instal-
lation may cause damage to your device and/or your vehicle.
Please consult your local motor vehicle laws on the use of this
product.
1. Camera
2. Transmitter
3. Receiver
4. Vehicle Power
Adapter (VPA)
5. Quick
Slide T-Tap
connector (x2)
6. Quick
Disconnect
Terminal (x2)
7. Adapter cable (For use with RoadMate 1700)
1
2
3
6
5
4
7
Backup Camera.indd 1 5/19/2011 9:30:23 AM

Magellan Back-up Camera Specifications

General

Brand	Magellan
Model	Back-up Camera
Category	Automobile Electronics
Language	English

Summary

Installation Steps

Camera Mounting and Cable Routing

Secure the camera to the license plate and route cables through the vehicle's interior.

Transmitter Wiring and Connection

Connect the transmitter to the vehicle's reverse light circuit and the camera.

Receiver Attachment and GPS Connection

Mount the receiver onto the GPS cradle and connect it to the GPS device's AV-IN port.

Technical Specifications

Camera Specifications

Details on imaging sensor, resolution, view angles, output, power, and dimensions.

Transmitter Specifications

Details on frequency, power, current consumption, ingress rating, and dimensions.

Receiver Specifications

Details on sensitivity, power, current consumption, temperature, and dimensions.

Regulatory and Environmental Information

FCC Interference Statement

Compliance with FCC Rules regarding radio frequency interference.

EU Environmental Protection

Guidance on proper disposal and recycling of electronic waste.