Magellan MG-6130 - General Options [090] Configuration; General Options [091] Configuration; Arming;Disarming Options [092] Configuration

Magellan 7
System Options
[090] General Options Bold = Default setting
Option OFF ON
[1] Access code length  6 digits  4 digits
[2] Audible trouble warning (except AC power failures)  Disabled  Enabled
[3] Lock master code  Disabled  Enabled
[4] Use user code 16 as duress code  Disabled  Enabled
[5] Console tamper supervision  Disabled  Enabled
[6] Need code to bypass zones  Disabled  Enabled
[7] PGM1 normal state  N.O.  N.C.
[8] PGM2 normal state  N.O.  N.C.
[091] General Options Bold = Default setting
Option OFF ON
[1] Panic 1 (Emergency)  Disabled  Enabled
[2] Panic 2 (Auxiliary)  Disabled  Enabled
[3] Panic 3 (Fire)  Disabled  Enabled
[4] Panic 1: Silent or audible alarm  Silent  Audible
[5] Panic 2: Silent or audible alarm  Silent  Audible
[6] Panic 3: Silent or audible alarm  Silent  Audible
[7] PGM1 used as (MG-6160 only)  Direct output  X10 output 7
[8] PGM2 used as (MG-6160 only)  Direct output  X10 output 8
[092] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1]
Auto-arm on time (
) †
 Disabled  Enabled
[2] Auto-arm on no movement †  Disabled  Enabled
[3] Auto-arm in what arming mode †  Regular  Stay
[4] Switch to Stay arming if no entry delay is opened  Disabled  Enabled
[5] Regular arming switches to Force arming †  Disabled  Enabled
[6] Stay arming switches to Force arming †  Disabled  Enabled
[7] One-touch Regular/Force arming †  Disabled  Enabled
[8] One-touch Stay arming  Disabled  Enabled
† Force arming and Auto-arming are not for use in UL installations.
[093] Arming/Disarming Options Bold = Default setting
Option OFF ON
[1] Future use  Future use  Future use
[2] Future use  Future use  Future use
[3] Bell squawk when arming/disarming with remote control *  Disabled  Enabled
[4] No exit delay when arming with remote control  Disabled  Enabled
[5] Report system disarming  Always  After alarm only
[6] Exit delay termination  Disabled  Enabled
[7] Follow zones become Entry Delay 2 zones when Delay zone is
bypassed
 Disabled  Enabled
[8]
FM tuner ON when system is armed (
) (MG-6160 only)
 Disabled  Enabled
* Bell Squawk on Arm must be enabled for UL installations.
J[8] J[2]
J[8] J[1]