Programming Page 11
[101] to
[132]
Assign wireless transmitters [101] = Zone Input 1
[132] = Zone Input 32
Enter 6-digit serial number or press
and release the transmitter’s
tamper switch.
To delete an assigned transmitter,
enter 000000 as a serial number.
See text Remote controls To program remotes controls, refer
to User Code and Remote Control
Programming in the EVO
Programming Guide or program
remotes using WinLoad.
NOTE: If programming REM1 /
RAC1/ REM2 / RAC2 / REM15
remotes for a system that does not
include a K641/K641R keypad,
enable EVO option [1] in section
[3029] and refer to “RTX3 Remote
Programming for EVO - Without a
K641/K641R Keypad” on page 14.
[601] to
[632]
Transmitter signal strength [601] = Zone input 1
[632] = Zone input 32
3 or less = weak (move transmitter)
4 to 10 = OK
[701] to
[732]
Current battery life [701] = Zone input 1
[732] = Zone input 32
View number of weeks the
batteries have been in the
transmitter.
[801] to
[832]
Previous battery life [801] = Zone input 1
[832] = Zone input 32
View number of weeks the
previous batteries were in the
transmitter.
[671] to
[678]
2WPGM signal strength [671] = PGM 1
[678] = PGM 8
3 or less = weak (move transmitter)
4 to 10 = OK
Section Feature Details
To Next Page
Loading...