9
ASSEMBLY
1. Remove the product from its packaging materials. No assembly is required as the unit is preassembled.
2. The baking rack handle folds into the baking rack face panel when not in use for convenient storage. To
unfold the handle for use, pull the right end of the handle out and away from the pizza oven until it is
perpendicular with the oven and locked in place.
3. Before the first use, thoroughly wash the baking rack with a warm, soapy cloth. Gently rinse the parts and
dry them thoroughly. Using a damp cloth, wipe the inner surface of the crumb tray and dry it thoroughly.
NOTE: DO NOT immerse the baking rack face panel or the pizza oven in water or any other liquids.
4. Reinsert the crumb tray and baking rack into the pizza oven. Ensure the hinged crumb tray is locked into
place with the pizza oven housing. Place the oven on a flat, dry surface away from the countertop edge and
plug the unit into a 120V AC electrical outlet.
To Next Page
Loading...
Need help?
General
