8
BEFORE USE
Carefully unpack the unit and remove all packaging materials. Wash the Food Guide and Blade in warm, soapy
water to remove any dust that may have accumulated during shipping process. DO NOT immerse motor base,
power cord or plug in water or any other liquid. Wipe Motor Base with a damp cloth.
CAUTION: The Blade is very sharp. Use care when removing, handling, and washing.
ASSEMBLY
1. Place the slicer on a stable, dry, and level surface.
2. Make sure On/Off switch is in off position.
3. Ensure that the Blade is properly assembled with Blade Locking Screw securely tightened.
4. Remove Food Gripper Guide from slicer.
5. Make sure food to be sliced fits on the Food Carriage without exceeding height of Blade.
6. Position the Food Gripper Guide on back edge of Food Carriage.
7. Place your hand on the curved ridge edge of Food Guide, ensuring your thumb is behind the Thumb Guard.
8. Set Thickness Control Knob to desired thickness.
To Next Page
Loading...
