Magic Chef® Water Dispenser Product Guide
11
Water is leaking.
Problem Possible cause Solution
• There may be a leak in the
water bottle.
• There may be a leak in one
of the water pipes.
• Unplug the dispenser, remove the
bottle and replace it.
• Contact NewAir for further assistance.
There is no hot or cold water.
Problem Possible cause Solution
cold water.
• Overconsumption of hot or
cold water in a short
amount of time.
• Wait a little while for the unit to
produce more cold or hot water.
• Water is not ready after
initial setup.
• Wait up to one hour after setup for
cold water, and 15-20 minutes for hot
water.
not on.
• Ensure that the red and green power
switches on the back of the unit are on.
There is no water flow.
Problem Possible cause Solution
flow.
• The water bottle may be
empty.
• The pump or water tanks
may be malfunctioning.
• Replace the water bottle.
• Contact NewAir for further assistance.
The unit is noisy.
Problem Possible cause Solution
• The unit is not on a flat
and level surface.
• Place the machine on a flat and level
surface.
To Next Page
Loading...
Need help?
General