Magic Chef® Water Dispenser Product Guide
10
Make sure the power switch is in the off position and unplug the unit from the outlet before performing
any maintenance or servicing the product.
Cleaning the Housing
• Use a soft, damp cloth to wipe the body clean. Clean the drip tray and storage cabinet as
needed.
• Remove dust from the condenser coils on the back of the unit to improve efficiency.
• Never use strong chemicals, gasoline, detergents, chemically-treated cloths, or any other
cleaning solutions to clean the water dispenser, as these can all potentially damage the unit.
• Never use detergent or chemicals that are potentially harmful to your health when cleaning.
• Do not spray water directly onto the surface of the product when cleaning, as some electrical
components may get wet and subsequently damaged.
Cleaning the Water Tanks
1. Make sure the unit is off and unplugged before cleaning.
2. Remove the two screws , then remove the top cover, cold water tank cover and separator .
3. Pour about half a gallon of water into the cold water tank.
4. Place a large water bucket beneath the drain on the back of the water dispenser, then remove
the drain cover and drain the water .
5. Once draining is complete, replace the drain cover, separator, cold water tank cover and top
cover. Ensure the pump and wires are all connected properly before resuming regular use.
The hot water tank is not directly accessible, since the water inside is kept extremely hot.
You can drain the hot water tank from the drain plug in the back, but use caution, the
draining water will be extremely hot as well!
The machine should be disinfected separately and then cleaned thoroughly with water every three
months. To remove mineral deposits or fix clogged pipes, you should contact NewAir for assistance.
To Next Page
Loading...
Need help?
General