To Next Page
J
Jonathan RobinsonJul 30, 2025
What to do if function is not operating on Magic Mobility Extreme X8 Wheelchair with slope sensor?
- BBenjamin BryanJul 30, 2025
If a function on your Magic Mobility Wheelchair with a slope sensor isn't working, try these steps: * Drive the lift function downwards until it stops in the home position. * Drive the tilt function forwards until it stops in the home position. * Drive the recline function forwards until it stops in the home position. * If your chair is still inhibited, refer to the Common Troubleshooting section and follow instructions for your particular Joystick Module.
General
