Need help?Do you have a question about the MAGIC SCREED E-Screed HDE-1010 and is the answer not in the manual?
Lists recommended safety equipment for operating the screed, including hardhat, boots, goggles, gloves, and hearing protection.
Details the LiFePo4 battery technology, its benefits like safety, power, and convenience, and its cycle life.
Provides key technical specifications for the battery, including chemistry, dimensions, weight, voltage, and capacity.
Explains the meaning and placement of warning logos on the E-Screed, such as 'Use with Caution' and safety gear icons.
Instructions for fully charging the battery before first use and details on charging time and indicator lights.
Guidelines for storing the battery, including temperature recommendations and handling in cold conditions.
Steps for checking and attaching the blade, ensuring correct placement of plastic spacers and tightening torque.
Instructions for installing the charged battery and adjusting the handles for operator comfort.
Guidance on operating the screed on wet concrete, controlling vibration, and avoiding damage from improper use.
Lists available blade sizes (in FT and M) and their corresponding part numbers for the E-Screed.
Provides weight and length details for different screed components and assembly recommendations.
Steps for unpacking the screed, inserting and tightening the adjustable handles for user comfort.
Instructions for placing the stand correctly and connecting the throttle cable and battery to the control box.
Detailed guide on assembling the blade with bolts, washers, and plastic spacers, emphasizing torque and spacer importance.
Lists parts for the rubber cover assembly (DA 4055) and tie raps (20040).
Details parts for Vibro Mounts (DA 4059) and X-TRA Vibro Mounts (DA 4059-X), including nuts and washers.
Specifies bolts, nuts, and washers for 1/2 inch connections (DA 4061) and plastic spacers.
Lists components for the stand assembly (DA 4088), including stand, rubber, and rivets.
Lists Allen wrench (DA 4097) and tie raps for general use (DA 4098) and handles (DA 4099).
Details anti-vibration seals (DA 4100) and caps for 8mm nuts (DA 4101).
Identifies the E-Screed Grip assembly (E-60004), battery pack (E-60140), and battery charger (E-60141).
Specifies the European battery charger (E-60142) and the motor & gear box kit (KE5010).
Lists parts for the plastic cover assembly (KE5020) and throttle assembly (KE5030).
Details parts for the control box assembly (KE5040) and bolt controller box (KE5050).
Lists components for the housing weight assembly (KE5060) and battery wire assembly (KE5080).
Specifies the equipment type (Vibrating screed), model numbers, and provides a space for the serial number.
Lists the EU directives (2006/42/EC, 2004/108/EC) and standards (BS EN 12649, EN 12100) the equipment complies with.
Provides the manufacturer's address in Quebec, Canada, and contact phone number and website.
General| Brand | MAGIC SCREED |
|---|---|
| Model | E-Screed HDE-1010 |
| Category | Construction Equipment |
| Language | English |
To Next Page