Why is my MAGIMIX L EXPRESSO not working?
If the appliance isn't working at all, check the connections. Also, if the pump was run without water, the safety system may have been triggered. Wait 30 minutes before switching your coffee maker back on.
Why is there water around my MAGIMIX L EXPRESSO Coffee Maker?
If you see water around the base of the appliance, empty the drip tray regularly.
What to do if the pipe leaks on my MAGIMIX L EXPRESSO?
If the pipe leaks, turn the selector right round to the appropriate setting.
Why does my MAGIMIX L EXPRESSO Coffee Maker espresso taste unpleasant?
If your espresso has an unpleasant taste after descaling, the descaling product may be too strong. Rinse and fill the water tank with fresh water, then run half the water through the pipe and the other half through the filter holder. Also, your ground coffee may be stale or too acidic, so try a new batch, using freshly-ground coffee stored in an airtight container in the fridge. Your tap water might also contain chloride, which affects the taste, so try using filtered or bottled spring water.
What to do if my MAGIMIX L EXPRESSO Coffee Maker espresso flows too slowly?
If the espresso flows too slowly or not at all, it could be due to several reasons. You might be using too much coffee, so choose a coarser grind and avoid tamping it down too much. The filter could be blocked; if it has a screw, unscrew, clean, and re-tighten it; if it doesn't have a screw, clean or replace it. Descale your appliance. Also, wipe the grid of the extractor head with a damp sponge.
How to get creamy top from MAGIMIX Coffee Maker?
If there is little or no creamy top on your espresso, ensure you are using freshly-ground coffee stored in an airtight container in the fridge. Try using coffee with a finer grind or try another brand of coffee pod. Also, try increasing the amount of ground coffee you use and tamping it down lightly.
What to do if coffee flows over the sides of the filter holder on MAGIMIX L EXPRESSO Coffee Maker?
If the coffee flows over the sides of the filter holder, reduce the amount of ground coffee you use and tighten the filter holder. Ensure the coffee pod has been correctly positioned. Clean the extractor head and the rim of the filter before inserting the filter holder.
How to make MAGIMIX L EXPRESSO Coffee Maker hotter?
If the coffee is not hot enough, wait until the indicator light stops flashing and stays on before brewing. Preheat the cups and filter holder before brewing your coffee.
What to do if MAGIMIX L EXPRESSO won't froth milk?
If you cannot froth the milk, the pipe may be blocked or clogged with limescale. Use a tall, narrow container (e.g., a small jug), preferably metal, and use cold whole milk.
Why are the cups not filled equally by my MAGIMIX L EXPRESSO?
If the cups are not filled equally, the ground coffee may not be evenly spread in the filter; tamp it down to make it more homogeneous. Also, clean the filter holder.
Steps to set up the appliance before first use, including cord, water tank, and power.
Instructions for adjusting the appliance's water hardness setting for optimal performance.
Steps to prepare the machine for brewing, including filling the tank and selecting the filter.
Steps for turning on the appliance and starting the coffee brewing process.
Explains the importance of descaling and how limescale affects the appliance's performance.
Detailed steps for descaling the Expresso model based on water consumption frequency.
Steps for descaling the Expresso Program and Program Automatic models.
General| Type | Espresso Machine |
|---|---|
| Pump Pressure | 19 bar |
| Material | Stainless Steel |
| Power | 1260 watts |
| Color | Silver |
To Next Page