What to do if the burner will not light with the igniter on my Magma Catalina A10-1218?
- RrhodeskennethAug 1, 2025
If the burner on your Magma Grill won't light with the igniter, it could be due to a few reasons. First, the igniter electrode might be covered with grease or residue; if so, clean the igniter electrode. Another cause could be that the igniter/electrode is too far from the burner; in this case, adjust the electrode until a proper spark appears. Also, the igniter/electrode wire might be loose or disconnected; reconnect the wire between the igniter and electrode. If the wire is shorted, causing a spark from the wire before the electrode, or if no spark is being generated, call Magma.