Why is my Magnasonic SelfSet MM176K not showing the correct time?
If your Magnasonic Clock Radio displays the incorrect time, the batteries may be inserted incorrectly, not connected, or dead. Please check the batteries. Also, ensure that the clock itself is properly set.
What to do if my Magnasonic Clock Radio alarm does not turn on?
If the alarm on your Magnasonic Clock Radio isn't working, there are a few things to check: * Make sure you've actually set the alarm to turn on by pressing and holding the ALARM 1 or ALARM 2 button. * Verify that the clock is properly set to the correct time. * Confirm that you've set the alarm time.
How to fix no sound on Magnasonic SelfSet MM176K?
If you're not getting any sound from your Magnasonic Clock Radio, first ensure that the power is turned on by pressing the power button. Also, check the volume control and make sure it isn't set to the minimum position. If it is, turn the volume up.
What to do if my Magnasonic SelfSet MM176K Clock Radio power does not come on?
If your Magnasonic Clock Radio isn't powering on, make sure the AC cord is fully plugged into the AC outlet.
How to fix distorted sound on Magnasonic SelfSet MM176K Clock Radio?
If you are experiencing noise or distorted sound on your Magnasonic Clock Radio, here are a few things to try: * For AM radio, try repositioning the radio to improve the AM reception. * For FM radio, make sure the antenna wire is fully extended.
General| Display Type | LED |
|---|---|
| Snooze Function | Yes |
| Radio Bands | AM/FM |
| Power Source | AC Power |
| Automatic Time Setting | Yes |
| Alarm Type | Buzzer |
| Battery Backup | Yes |
To Next Page
