To Next PageTo Next PageWhat to do if my Magnavox LCD TV has no power?
First, ensure the TV's AC power cord is securely plugged into the mains socket. If it is, unplug the TV, wait 60 seconds, then plug it back in and turn the television on again.
Why is my Magnavox 15MF227B LCD TV television not responding to the remote control?
Check whether the batteries in the remote are working and replace them if necessary. Clean the remote control sensor lens on the TV. Ensure you are within the operating range of approximately twenty feet. As an alternative, you can use the buttons on the top of your TV. Also, check if the remote control is in the correct mode.
Why is there no sound on my Magnavox 15MF227B?
First, increase the volume. Also, check that the TV is not muted by pressing the MUTE button on the remote control. Note that when no signal is detected, the TV automatically switches off the sound, which is normal.
What to do if my Magnavox 15MF227B LCD TV has no picture?
Check the antenna connections at the bottom of the TV to ensure they are properly connected. Try changing to another channel. Adjust the contrast and brightness settings, or try another auto picture setting. Also, check the Closed Captions control, as some TEXT modes could block the screen. Finally, make sure you've selected the correct AV source.
What to do if my Magnavox 15MF227B has good sound but poor color or no picture?
Adjust the contrast, color, tint, and brightness settings. Alternatively, try another auto picture setting.
Why does my Magnavox 15MF227B LCD TV have a snowish picture and noise?
Check the antenna connection.
How to fix ghost or double images on my Magnavox 15MF227B?
This issue may be due to obstructions like high-rise buildings or hills affecting the antenna signal. Using a highly directional antenna may improve the picture.
Why is my Magnavox 15MF227B LCD TV not playing photo, music or video or playing it in poor quality only?
Check if the source complies with a supported code.
What to do if my Magnavox 15MF227B LCD TV PC modes do not work?
Check whether the connections are correct. Make sure the source is correctly selected by pressing the SOURCE button. Also, verify that you have configured the computer on a compatible display resolution.
General| Screen Size | 15 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1024 x 768 |
| Aspect Ratio | 4:3 |
| Response Time | 16 ms |
| HDMI Ports | 1 |
| USB Ports | 0 |
| Brightness | 250 cd/m2 |
| Inputs | Composite, VGA |
| Power Consumption | 30W |
