Magnavox 32MV402X User Manual (English)

Other manuals for Magnavox 32MV402X

Owner's Manual55 pages

Manuel Du Propriétaire25 pages

Manual Del Propietario25 pages

Questions and Answers:

J
Jason FloresAug 20, 2025
What to do if my Magnavox TV has no picture or sound?
- S
  Sandra BeardAug 20, 2025
  If your Magnavox TV has no picture or sound, try these steps: * Check other TV channels to rule out broadcasting issues or weak signal strength. * Unplug the AC power cord, wait a minute, then plug it back in and turn the TV on again. * Ensure Autoprogram is completed, especially after the initial setup or moving the TV. * Verify the selected channel isn't blocked by Child and ratings lock settings. * Confirm an input signal is connected via an indoor/outdoor antenna or RF coaxial cable.
R
Rebecca PhillipsAug 22, 2025
Why is my Magnavox TV remote control not working?
- J
  Jason KimAug 22, 2025
  If the remote control buttons on your Magnavox TV do not work, first, re-insert the batteries, ensuring the polarities (+/- signs) are correctly aligned. Also, check for any infrared-equipped devices nearby, such as a PC, as they may interfere with the remote control signal.
T
Toni RileyAug 25, 2025
Why is the picture quality poor on my Magnavox TV but the sound is OK?
- L
  Logan RoseAug 25, 2025
  If your Magnavox TV's sound is okay but the picture is poor, electrical interference from nearby appliances might be the cause. Try adjusting the Contrast and Brightness in the Picture settings. Also, for the best picture quality, watch 'High Definition' wide screen programs. If HD content isn't available, watch 'Standard Definition' programs instead.
C
Christopher MartinAug 27, 2025
Why does the volume change when I switch inputs on my Magnavox TV?
- R
  Robert JacobsAug 27, 2025
  If the volume changes when you switch to a different input on your Magnavox TV, note that the unit memorizes the volume level from the last adjustment. Also, the loudness changes if the sound volume from another device is higher or lower.
M
marc63Aug 28, 2025
Why does the screen size change when switching inputs on my Magnavox TV?
- J
  Jose MartinezAug 28, 2025
  If the screen size changes when you switch to a different input on your Magnavox TV, this unit memorizes the viewing mode from the last time you used those particular input modes.
A
Anthony CannonAug 30, 2025
How to fix Magnavox TV when the display image doesn't cover the entire screen?
- J
  Jennifer MillerAug 30, 2025
  If the display image doesn't cover the entire screen on your Magnavox TV, and you're using it as a PC monitor, ensure that Horizontal shift and Vertical shift in PC settings are correctly adjusted. If you're watching TV or using Composite Video, Component Video, or HDMI with 480i Input, press FORMAT repeatedly to switch through various screen modes.
A
Amanda RobinsonSep 1, 2025
How to restore color on Magnavox TV?
- K
  Kelsey WoodSep 1, 2025
  If there is no color on your Magnavox TV, adjust Color in the Picture settings.
R
Rhonda JenkinsSep 3, 2025
How to reset a forgotten PIN code on Magnavox TV?
- M
  Miranda OliverSep 3, 2025
  If you have forgotten the PIN code for your Magnavox TV, enter “0711” to clear your password.
M
Megan LewisSep 4, 2025
What to do if there is no sound when using HDMI-DVI connections on Magnavox TV?
- K
  Kenneth SmithSep 5, 2025
  If you experience no sound, distorted sound, or incorrect audio when using HDMI-DVI connections on your Magnavox TV, ensure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio Input L/R jacks.
C
Charles LeeSep 7, 2025
How to fix Magnavox TV when it has no power?
- H
  Howard BryantSep 7, 2025
  If your Magnavox TV has no power, ensure the AC outlet provides the correct voltage by testing it with another appliance. If a power failure occurred, unplug the AC power cord for 1 minute to reset the unit.

Magnavox 32MV402X Specifications

Display

panel resolution	720p, 1366 x 768 pixels
aspect ratio	Widescreen
picture enhancement	Progressive scan, 3D Combfilter, Digital Noise Reduction, Dynamic contrast enhancement, 3/2 - 2/2 motion pull-down, Clear Pix Engine Plus

Power

mains power	120V/60Hz
standby power consumption	<0.5W
power consumption	54 W
ambient temperature	5°C to 40°C (41°F to 104°F)

Audio

sound system	Mono, Stereo, SAP, Dolby Digital (AC-3)
sound enhancement	SRS TruSurround XT
output power (RMS)	2 x 10W

Weight and Dimensions

diagonal screen size	32 inch / 81 cm
visible screen diagonal	31.5 inch
set dimensions	29.8 x 18.7 x 2.3 inch
set dimensions with stand	29.8 x 20.4 x 7.1 inch
product weight	14.56 lb
product weight with stand	15.22 lb
box dimensions	33.4 x 21.7 x 4.7 inch
weight including packaging	18.3 lb