Why is my Magnavox 37MF337B LCD TV not responding to the remote control?
If your Magnavox LCD TV isn't responding to the remote control, try the following: Check the batteries and replace them if needed. Clean the remote control sensor lens on the TV. Ensure you're within the operating range of approximately twenty feet. You can also use the buttons on top of the TV. Lastly, check if the remote control is in the correct mode.
How to fix a Magnavox LCD TV that won't turn on?
If your Magnavox LCD TV isn't powering on, ensure the AC power cord is securely plugged into the mains socket. If it's still not working, unplug the TV, wait 60 seconds, then plug it back in and try turning it on again.
Why is there no sound on my Magnavox LCD TV?
If you're experiencing a lack of sound on your Magnavox LCD TV, there could be a few reasons. First, make sure to increase the volume. Second, check that the TV is not muted by pressing the MUTE button on the remote control. Also, when no signal is detected, the TV automatically switches off the sound, which is normal.
What to do if there is no picture on my Magnavox LCD TV?
If your Magnavox LCD TV shows no picture, try these steps: Check the antenna connections at the bottom of the TV to ensure they are properly connected. It could also be a broadcast station issue, so try another channel. Adjust the contrast and brightness settings, or try a different auto picture setting. Also, check the Closed Captions control, as some TEXT modes might block the screen. Finally, ensure you've selected the correct AV source.
What to do if my Magnavox 37MF337B LCD TV has sound but poor color or no picture?
If your Magnavox LCD TV has good sound but poor color or no picture, try adjusting the contrast, color, tint, and brightness settings. You might also want to try another auto picture setting.
How to resolve snowish picture and noise on Magnavox 37MF337B?
To resolve a snowish picture and noise on your Magnavox LCD TV, check the antenna connection.
How to fix ghost or double images on Magnavox LCD TV?
Ghost or double images on your Magnavox LCD TV may be caused by obstructions to the antenna, such as high-rise buildings or hills. Using a highly directional antenna may improve the picture.
Why PC modes do not work on Magnavox 37MF337B LCD TV?
If PC modes aren't working on your Magnavox LCD TV, first check that all connections are correct. Then, ensure the source is correctly selected by pressing the SOURCE button. Finally, verify that your computer is configured to use a compatible display resolution.
How to prevent Magnavox 37MF337B from interfering with accessory devices?
To prevent your Magnavox LCD TV from interfering with accessory devices, be aware that the screen's infrared signals might affect the reception of other peripherals. Try replacing the batteries in the remote controls of other devices. Also, keep wireless headphones at least four feet away from the TV.
General| Screen Size | 37 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| HDMI Ports | 2 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| Audio Output | 10W x 2 |
| Inputs | HDMI, Component, Composite |
| Viewing Angle | 178° (H) / 178° (V) |
| Speakers | 2 x 10W |
To Next Page
