How to fix Magnavox 50ME313V remote control not working?
If the remote control buttons on your Magnavox LCD TV aren't working, first, re-insert the batteries, ensuring the polarities (+/- signs) are correctly aligned. Also, check for any infrared-equipped devices nearby that might be interfering with the remote control signal.
How to fix no power on Magnavox 50ME313V?
If your Magnavox LCD TV has no power, ensure the AC outlet is providing the correct voltage by testing it with another electrical appliance. If a power failure has occurred, unplug the TV's AC power cord for 1 minute to allow it to reset.
What to do if Magnavox 50ME313V has power but no screen image?
If your Magnavox LCD TV has power but no screen image, verify the antenna, cable receiver, or satellite box is correctly connected. Also, check that all cables to the TV are connected to the correct output jack of your Blu-ray or DVD recorder. If using PC mode, ensure your computer is not in sleep mode by tapping a key on the keyboard. Finally, confirm the correct input mode is selected by pressing SOURCE or using CH + / -.
Why does my Magnavox 50ME313V LCD TV have no picture or sound?
If your Magnavox LCD TV has no picture or sound, try viewing other TV channels to rule out broadcasting issues or weak signal strength. Unplug the AC power cord for about 1 minute, then plug it back in and turn the TV on again. Ensure Autoprogram is completed, especially after the first setup or moving to a new location. Check that the selected channel isn't restricted by Child and ratings settings. Confirm an input signal is connected via an indoor/outdoor antenna or RF coaxial cable from a cable/satellite box.
Why does the screen size change on my Magnavox 50ME313V LCD TV when I switch inputs?
If the screen size changes when you switch to a different input on your Magnavox LCD TV, this is because the TV memorizes the viewing mode from the last time you used that particular input mode.
Why do I see noise or trash on the screen of my Magnavox 50ME313V LCD TV?
If you see noise or trash on the screen of your Magnavox LCD TV, it's because the signal will be increased to match the capabilities of the display of the unit when the capabilities of the unit exceed the capabilities of the digital broadcasting.
Why are captions displayed as a white box on my Magnavox LCD TV?
If captions are displayed as a white box on your Magnavox LCD TV, it may be due to interference from buildings or weather conditions causing incomplete captioning.
Why is a black box displayed on the screen of my Magnavox LCD TV?
If a black box is displayed on the screen of your Magnavox LCD TV, it indicates that the text mode is selected for caption.
Read and follow all instructions, heed warnings, and avoid water and heat sources.
Properly use grounding plugs and protect power cords from damage.
Use specified stands/brackets and exercise caution with carts to prevent tip-overs.
Unplug during storms, refer servicing to qualified personnel.
Advice on positioning the TV safely, avoiding direct sunlight and heat.
Guidance on connecting an antenna for free DTV programs.
Resolving problems related to no power or non-responsive remote controls.
Troubleshooting common issues like no image, poor color, or distorted sound.
Technical details for picture resolution, aspect ratio, and audio output.
Power| mains power | 120V/60Hz |
|---|---|
| power consumption | 145 W |
| standby power consumption | <0.5W |
Display| diagonal screen size | 50 inch / 127 cm |
|---|---|
| visible screen diagonal | 49.5 inch |
| panel resolution | 1920x1080p |
Weight and Dimensions| weight | 29.55 lb |
|---|---|
| weight with stand | 32.63 lb |
| box weight | 40.57 lb |
| dimensions | 46.00 x 27.60 x 4.90 inch |
| dimensions with stand | 46.00 x 29.70 x 10.70 inch |
| box dimensions | 51.90 x 32.20 x 8.20 inch |
To Next Page
