M
Manuel BallardAug 21, 2025
Why Magnavox MWD2206 DVD VCR Combo not responding to remote control?
- EErica WrightAug 21, 2025
If your Magnavox DVD VCR Combo isn't responding to the remote, try these steps: * Ensure the power plug is connected to an AC outlet. * Check and replace the batteries in the remote. * Aim the remote directly at the sensor, removing any obstacles. * Make sure you're within 23 feet (7m) of the unit. * Select the correct mode (DVD or VCR) on the remote. * Check if a cassette tape is inserted. * Tune your radio to an empty AM station and turn the volume up. If you hear signal sounds when pressing remote buttons, the remote is working.