3
5. Before connecting or disconnecting any cables, always turn off your equipment.
6. Before turning the power ON/OFF, turn your volume control to the lowest output level.
Connections
Note : make all connections to and disconnection from the SA-4 with AC Power disconnected
and all system components switches “OFF.”
1 2 3 4 5 6 7 8 12
9 10 11
INPUTS The SA-4 has a total of 6 line level inputs.
1. CD receive signals from Compact Disc player.
2. TUNER receive signals from Tuner.
3. LASER receive signals from Laser Disc player.
4. VIDEO receive signals audio out of VCR.
5. LINE receive signals from line level input.
6. TAPE receive signals from cassette tape player.
REC (Recording output monitor)
7. REC Send output signals from selected program source to Cassette tape input. To record
from the program source onto Cassette tape, turn the selector switch to the source program
you wish to record and press record on the cassette tape player.
8. PRE-OUT / MAIN-IN With the U-link connected, the SA-4 is an integrated amplifier.
Disconnected the U-link, the SA-4 functions as separate pre-amplifier and power amplifier.
PRE-OUT is the output from the preamplifier section. MAIN-IN is the input for the power
amplifier section.
9. SPEAKERS Connect to your loudspeaker. Ensure that you have the correct phase and
channel output to your speaker.
10. UNSWITCHED This is an unswitched (not controlled by the front panel POWER switch)
AC out. The maximum output current is 1 Amp.
To Next Page
Loading...