EasyManua.ls Logo

Magnet SA-4 - Specifications; Line Amplifier Specifications; Power Amplifier Specifications; General Product Specifications

Default Icon
7 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Specifications
LINE AMPLIFIER SECTION
Frequency Response (20-20,000Hz) + 0.09, -0.03 dB
THD+noise @ 1 Vrms (20-20,000Hz) <0.01%
Input Impedance 50K Ohms
Maximum Gain 15.5 dB
Signal / Noise 98 dB
Maximum Output at 1K 7 Vrms
POWER AMPLIFIER SECTION
Frequency Response (20-20,000Hz) +0. -0.09 dB
THD+Noise (20-20,000Hz) <0.01%
Input Impedance 50K Ohms
Maximum Power Output (into 8 Ohms) 30 Wrms per channel
Input Power As marked on the rear panel
Power consumption 150 W
Size 17"W x 3.75”H x 12.”D
Weight Net 6.4 Kg, Shipping 7.4 Kg
Warranty Information
1. MAGNET Technology Corporation(hereinafter referred to as MAGNET) warrants to the
original retail purchaser only, that its product is free from defects in material and
workmanship under normal use and authorizes free service and/or parts exchange at any
MAGNET Authorized Service Station only, for a period of ONE year from the date of
purchase.
2. The warranty is subjected to the following conditions and limitations. The warranty is void :
if product has been used other than in accordance with the instruction in the owner’s
manuals: abused or misused or is due to the product being repaired or tampered with by
anyone other than Magnet Technology Corp. or an authorized repair center.
3. The warranty does not apply to defects or failure caused by unauthorized parts, improper
maintenance, fire, flood, lightning or other natural causes.
4. This warranty does not include the damage of external parts i.e., faceplate, knobs, metal
casing, etc.
5. A returned product must include a copy of the Warranty Certification and the bill of sale.
6. The warranty does not extend to any incidental nor consequential cost or damages to the
purchaser.