Need help?Do you have a question about the Magnetic Autocontrol MPP-212 and is the answer not in the manual?
Specifies that barriers are for pedestrian access control and controllers for barrier operation.
Prohibits unauthorized changes and requires manufacturer authorization for modifications.
Defines qualification requirements for personnel handling the barrier, including instructed people, specialized staff, and electrical specialists.
Details qualification levels: instructed people, specialized staff, and electrical specialists, with specific requirements.
Highlights remaining risks and advises observing safety notes to reduce hazards and avoid dangerous situations.
Identifies dangerous areas via pictograms: Electric voltage (DANGER) and Danger of crushing (CAUTION).
Details hazard notes for electric voltage, including mortal danger and missing safety installations.
Details safety warnings for transporting the barrier, emphasizing weight and proper handling.
Warns about severe injuries from inappropriate installation and emphasizes qualified personnel and site preparation.
Warns of injury risk from improper transport and damage, requiring trained personnel and proper lifting gear.
Warns about injury risk when lifting heavy objects alone, requiring at least two people.
Warns about severe/lethal injuries from inappropriate installation and emphasizes qualified personnel and site tidiness.
Details mortal danger from electric voltage, requiring power off, isolation, and specialist work.
Highlights mortal danger from electric voltage due to missing safety installations, listing required devices.
Warns about severe/lethal injuries from inappropriate configuration and emphasizes qualified personnel.
Details mortal danger from electric voltage during configuration, requiring power off and specialist work.
Explains DIP switch settings (S1, S2, S3) for adjusting barrier functions and parameters.
Details functions and options for DIP switch block S1, including pulse storage, buzzer, drop arm, and safety level.
Details functions and options for DIP switch block S1, including hold-open time, version status, and home position.
Explains settings for DIP switch block S2, covering continuous turning, vandalism detection, and brake times.
Details DIP switch S2 settings for extended brake time at vandalism attempts and multiply brake time.
Provides an example configuration for DIP switches S1.4 and S2.4-S2.8 to set safety level and braking.
Explains DIP switch S3 settings for CAN termination, hold-open time, and brake function in home position.
Guides on setting the 'home position' for the blocking element during initial commissioning or controller replacement.
Warns about severe/lethal injuries from inappropriate start-up/operation and emphasizes specialist work and cover mounting.
Details mortal danger from electric voltage during start-up/operation, requiring power off and specialist work.
Warns about severe/lethal injuries from inappropriate maintenance and emphasizes specialist work and site preparation.
Details mortal danger from electric voltage during maintenance, requiring power off and specialist work.
Lists common malfunctions, their possible causes, corrective actions, and responsible personnel.
Lists various error codes for the MBC-110, their descriptions, possible causes, and corrective actions.
Lists more error codes for the MBC-110, including CAN bus errors and EEPROM issues.
Lists error codes for the MMC-120, including resolver, phase, DC bus, and temperature errors.
Covers safety for repair work, warning about injury risk from inappropriate procedures and electric voltage dangers.
Warns about severe/lethal injuries from inappropriate repair and emphasizes specialist work and site preparation.
Details mortal danger from electric voltage during repair, requiring power off and specialist work.
Specifies required personal protective equipment (PPE) for all repair work.
General| Brand | Magnetic Autocontrol |
|---|---|
| Model | MPP-212 |
| Category | Automatic Barriers |
| Language | English |
To Next Page
