Need help?Do you have a question about the Magnum Energy MMS Series and is the answer not in the manual?
General| Output Voltage | 120 VAC |
|---|---|
| Frequency | 60 Hz |
| Input Voltage | 12V, 24V |
| Transfer Time | 16 ms |
| Protection Features | Overload, over temperature, low battery voltage, high battery voltage, short circuit |
| Battery Charger | Built-in (on most models) |
| Battery Charger Voltage | 12V, 24V |
| Operating Temperature | -20°C – 60°C |
Key safety guidelines for installation and operation of the product.
Critical safety precautions for handling and working with batteries.
Lists key features like 1000W output, protection, transfer switch, and charging.
Covers pre-installation checks, unpacking, locating, and mounting the unit.
Details DC wire sizing, overcurrent protection, grounding, and cable connections.
Guidance on wiring batteries to match inverter voltage and provide runtime.
Covers AC wire sizing, GFCI, input/output connections for MMS1012.
Explains inverter grounding and neutral-to-ground bonding requirements.
Procedures for testing the inverter installation and operation.
Details how the inverter operates in Inverter mode, including Searching and Inverting.
Details fault conditions and how the inverter protects itself.
Guide to diagnose and resolve common inverter and charger faults.
To Next Page
