Need help?Do you have a question about the Magnum Energy MMS1012 and is the answer not in the manual?
General| Model | MMS1012 |
|---|---|
| Type | Modified Sine Wave Inverter |
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Continuous Power | 1000W |
| Surge Power | 2000W |
| Efficiency | 90% |
| Output Frequency | 60 Hz |
| Output Waveform | Modified Sine Wave |
States Magnum Energy's disclaimer of liability and restrictions on product use.
Provides contact details and explains terminology used in the manual.
Explains safety symbols and provides critical instructions for safe installation and operation.
Lists essential safety precautions and guidelines for handling and installing batteries with the inverter.
Introduces the MMS Series inverter/charger and describes the MMS1012 and MMS1012-G models.
Explains the fundamental principles of inverter and charger operation in mobile applications.
Highlights the key features, benefits, and capabilities of the MMS Series inverter/charger.
Identifies and describes components on the inverter's top, left, front, and back sides.
Explains the function and importance of the Battery Temperature Sensor (BTS) for charger performance.
Covers pre-installation checks, unpacking, and inspection of the inverter and its components.
Details environmental, safety, clearance requirements, and mounting orientation for the inverter.
Provides general wiring guidelines, DC wire sizing, protection, grounding, and connections.
Covers AC wiring preparation, connections, sizing, protection, GFCI breakers, and functional testing.
Describes Inverter Mode (OFF, Search, Inverting) and Standby Mode with battery charging.
Explains the 4-stage charging process, its graph, transfer time, and BTS impact.
Details protection circuitry, fault codes, startup, status indicator, and adjustable settings.
Provides recommendations for regular inverter/battery maintenance and off-season storage procedures.
Instructions for resetting the inverter and a guide to diagnosing and resolving common faults.
Explains how to size battery banks and describes available battery types suitable for inverter use.
Illustrates series, parallel, and series-parallel wiring methods for battery banks.
Outlines the terms and conditions of the limited warranty for the MMS Series Inverter/Charger.
Provides contact information and procedures for obtaining warranty service or repair for the product.
To Next Page
