Need help?Do you have a question about the Magnum Energy MagnaSine Hybrid MSH3012RV and is the answer not in the manual?
General| Model | MSH3012RV |
|---|---|
| Type | Hybrid Inverter/Charger |
| Input Voltage | 12 VDC |
| Output Voltage | 120 VAC |
| Output Power | 3000 W |
| Efficiency | 90% |
| Cooling | Fan Cooled |
| Warranty | 2 years |
| Output Frequency | 60 Hz |
| Waveform | Pure Sine Wave |
| Battery Voltage | 12 VDC |
| AC Input Voltage Range | 90-140 VAC |
| Maximum AC Input Current | 30 A |
| Surge Power | 6000 W |
| Operating Temperature | 0°C to 40°C |
| AC Input Frequency Range | 50Hz/60Hz |
| Storage Temperature | -40°F – 158°F (-40°C – 70°C) |
| Protections | Overload, over temperature, short circuit |
Explains the two primary operating modes: Inverter and Standby.
Highlights the benefits of pure sine wave output over other waveforms.
Details the physical features, indicators, and connection ports on the inverter.
Covers initial checks, tools, and materials needed before installation.
Provides guidelines for choosing an optimal location and mounting method.
General guidelines for AC and DC wiring, including protection and torque.
Specific instructions for DC wire sizing, overcurrent protection, and connections.
Guidance on AC wire size, overcurrent protection, and connections.
Explains proper grounding methods for AC and DC systems for safety.
Steps for verifying the installation and testing inverter operation.
Details the two main operational modes: powering loads and transferring AC power.
Explains the multi-stage charging process and its benefits for battery health.
How the inverter transfers AC power and supports loads beyond AC source capacity.
Covers the inverter's protective features and startup procedures.
Instructions for connecting and using RV-C communication and remote controls.
Common issues and their recommended solutions for inverter/charger failures.
Procedures for performing inverter resets (soft and hard) to clear faults.
Detailed technical specifications for the inverter and charger.
Graphical data on efficiency, temperature impact, and fault currents.
Guidelines for battery placement, selection, and managing temperature effects.
Information on calculating battery bank size and configuring wiring.
Lists typical power consumption for various appliances.
Explains different AC output waveforms (square, modified sine, pure sine).
Definitions of technical terms used throughout the manual.
Outlines the terms and conditions of the product's limited warranty.
Instructions for requesting warranty repair or replacement service.
To Next Page
