MAGUIRE LPD-30 User Manual

MAGUIRE PRODUCTS INC.
LPD
®
Dryer
LPD
®
Low Pressure Dryer
®
INSTALLATION • OPERATION • MAINTENANCE
Copyright © Maguire Products, Inc. 2010
Models:
• LPD-30
• LPD-100
• LPD-200

MAGUIRE LPD-30 Specifications

General

Brand	MAGUIRE
Model	LPD-30
Category	Dryer
Language	English

Summary

PART 1 GETTING STARTED, READ THIS PAGE

1.1 - Warranty – Exclusive 5-Year

Outlines the terms and conditions of the 5-year warranty for the dryer.

1.2 – SAFETY WARNINGS

Lists crucial safety precautions and warnings for operating the dryer.

PART 2 INSTALLATION

2.1 – Transport, Unpacking and Setup

Covers procedures for moving, unpacking, and setting up the dryer.

2.2 – Dryer Installation

Provides steps for physically installing the dryer components.

2.2.1 - Hopper Installation on the Series 30 model Dryers

2.2.2 - Hopper Installation on the Series 100, 200, model Dryers

2.2.3 – Installing Canisters on Series 200 model Dryers

2.2.4 - Compressed Air Connection

Details how to connect the compressed air supply.

2.2.5 - Electrical Connection

Instructions for making the electrical connections to the dryer.

2.3 – Installing the Maguire Receiver on a process machine

2.5 - Using the Maguire Receiver to load the Dryer

PART 3 OPERATION

3.1 - Standard Operation

Step-by-step guide for basic dryer operation.

3.3 – Standard Operating Sequence

3.4 – Operating Features/Options

3.6 – Controls Description

Explains the functions of the dryer's control panel and operator station.

3.6.1 – Controller & Operator Station

Controller – Front Panel

3.6.2 - Keypad

3.6.3 - Star Functions

Lists and explains various special functions accessible via star codes.

3.6.4 – Parameters

Explains how to access and change internal dryer parameters.

PARAMETERS - FULL EXPLANATIONS

Provides detailed explanations for various dryer operational parameters.

3.6.5 - Changing / Saving Parameters

Step-by-step guide for modifying and saving dryer parameters.

PART 4 MAINTENANCE AND SERVICE

4.1 - Clean / Replace Air Filter

4.2 - Cleaning the Vacuum Takeoff Assembly (VTA)

4.3 - Canister Removal / Cleaning

4.4 - Fill Hopper and Fill Valve Cleaning

4.7 - Adjustments

4.8 - Check Out Procedure

4.9 – Temperature and Pressure Verification

4.11 – Diagnostic / Test Mode

Guide to using diagnostic and test modes for troubleshooting.

PART 5 TROUBLESHOOTING / SOFTWARE

5.1 - ALARMS – Cause and Solution

Lists alarm conditions, their causes, and corrective actions.

5.2 - Possible Service Issues

5.2.1 – Loss of Vacuum

Troubleshoots issues related to loss of vacuum.

5.2.3 – Heater Safety Switch Tripped

Explains the cause and resolution of a tripped heater safety switch.

5.2.4 – Filter Clogged

5.5 - Dryer Software – Backup, Restore, Factory Reset

PART 6 General Information

6.6 - Warranty

6.7 – LPD wiring Diagram and Supplements

6.7 - Exploded View and Parts List

6.10 - Technical Support and Contact Information

Lists contact details for technical support and Maguire Products offices.