EasyManuals Logo

Mahindra 2014 Scorpio S10 User Manual

Mahindra 2014 Scorpio S10
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #161 background imageLoading...
Page #161 background image
12-8
© Copyright Mahindra & Mahindra Ltd. 082014
In the infotainment screen all the tyre locations will display the status as ‘OK’ if every
tyre pressure and temperature are at acceptable limits.
The TPMS has been customized only for the manufacturer’s genuine tyres and
wheels. TPMS pressure limits and warning messages have been established and
calibrated for the tyre size equipped on your vehicle. Replacement of manufacturer’s
parts with a different size, type or style of components may damage the sensor and
lead to incorrect readings.
Do not use aftermarket tyre sealants or balance beads if your vehicle is equipped
with TPMS. Failure to comply may lead to sensor damage.
The TPMS is not intended to replace normal tyre care and maintenance or to warn
of any tyre failure condition. The system should not be used as a replacement for a
pressure measuring gauge to adjust the vehicle tyre pressure.
Driving with under-inflated tyres cause the tyres to overheat and may lead to tyre
failure. Under-inflated tyres reduce fuel efficiency, tyre tread life and may affect the
vehicle's maneuverability and braking ability.
It is the driver's responsibility to maintain correct tyre pressure using an accurate
pressure gauge, even if under-inflation has not reached the level to trigger
illumination of the TPMS warning indicator.
12.6.2 TPMS Warning Lamp
For any alert condition, the TPMS warning lamp in the instrument
cluster will blink for 90 seconds and further will remain ON
continuously.
12.6.3 TPMS Sensor Installation
W12L11
1. Line the sensor up with the rim hole and attach the TTV insertion tool to the
end of the valve ready for pull in
2. Ensure the TTV insertion tool is positioned to the correct notch and that the
sensor is pulled through in a direction parallel to the valve whole axis and NOT
at an angle to it
3. The picture below shows a correctly fitted sensor. Note the rubber bulb of the
valve resting against the rim and the front face of the enclosure is NOT
touching the rim. Apply tyre soap solution to the rubber portion of the valve
stem and the top of the enclosure
WHEELS AND TYRES

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mahindra 2014 Scorpio S10 and is the answer not in the manual?

Mahindra 2014 Scorpio S10 Specifications

General IconGeneral
BrandMahindra
Model2014 Scorpio S10
CategoryAutomobile
LanguageEnglish

Related product manuals