D-3
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
Clutch
1. SERVICING SPECIFICATION
SPECIFICATION (FACTORY) ALLOWABLE LIMIT
A. Clutch disc main Thickness 0.393 in. 0.295 in.
B. Pressure plate Flatness 0.004 in. 0.006 in.
C. Diaphragm spring Mutual — 0.020 in.
difference
2. SPECIFICATIONS
1. Make Valeo
2. Type of clutch Single Plate Diaphragm Spring
Dry ceramic pad
3. Main drive member (in) 11”
Clearance
1. Release bearing to release finger 0.11 inch
2. Release lever height from flywheel (main drive) 1.71 ± 0.078 inch
Pedal setting
1. Pedal freeplay 1.6 to 1.8 inch
TORQUE
1. Clutch release fork bolt 41 - 50 Nm (30 - 37 lb.ft.)
2. Clutch assy. mounting bolt 21 - 25 Nm (15 - 18 lb.ft.)
To Next Page
Loading...
Need help?
General