Need help?Do you have a question about the Mahindra 3616 and is the answer not in the manual?
General| Engine Power | 36 HP |
|---|---|
| Hydraulic System | Open center |
| Fuel Capacity | 10.6 gallons |
| Engine Cylinders | 3 |
| Fuel Type | Diesel |
| Drive | 4WD |
| Lift Capacity | 2205 lbs |
| Hydraulic Remotes | 1 (standard) |
| Transmission | 8F/8R Synchro Shuttle |
| Displacement | 166.7 cu in |
Manufacturer statement, defect warranty, and customer rights.
Owner's duties and specific terms of the emissions warranty.
Lists covered parts and the length of warranty coverage.
Details claims process, exclusions, and no-cost repairs.
Owner's maintenance role and coverage for consequential failures.
Introduction to the manual's content.
Clarifies the meaning of directional terms used throughout the manual.
Shows locations for identifying tractor and component serial numbers.
Precautions for operating the tractor safely.
Essential safety steps before performing maintenance.
Safety for handling high-pressure fluids and refueling.
Procedures for working with electrical systems and batteries.
Safety steps before PTO work and steering wheel play.
Guidelines for safely starting and driving the tractor.
Safety for operating on rough ground and in enclosed areas.
Safety for driving on roads and locking brake pedals.
Precautions for steering, turning, and operating on hills.
Advice on operating on slopes and recovering from ditches.
Instructions for safely mounting and operating tractor attachments.
Warning about potential explosion from starting aids.
Warning about battery acid and explosion risks.
Caution about rotating parts and the need for guards.
Warnings before starting engine and about tractor rollover.
Safety for stopped tractor and AC system servicing.
Information on the foldable ROPS frame and its normal operating position.
Instructions for operating with ROPS in the lowered position.
Important check for clearance when ROPS frame is lowered.
ROPS replacement after accident and safety rules.
Information about ROPS and cabin serial number plates.
Steps to adjust the ROPS to its regular position.
Loosening fasteners and removing lock pins for ROPS adjustment.
Steps to adjust the ROPS to the second position.
Adjusting ROPS for storage and fine-tuning friction.
Warning about proper assembly for rollover protection.
Details on engine type, bore, stroke, and displacement.
Engine firing order and compression ratio specifications.
Specifications for engine lubrication and fuel systems.
Details on the cooling system and thermostat specifications.
Details on brakes, transmission type, and gear selection.
Specifications for the clutch, MFD, and front axle.
Information on differential lock and steering system.
Details on hydraulic pump type and capacity for hitch/steering.
Specifications for the rear PTO system, including type, location, and shaft.
Details on the mid PTO option, including shaft size and speed.
Overall length, width, height, and wheelbase specifications.
Specifications for ground clearance and turning radius.
Speed chart for the 3016 model, Gear Drive and Hydrostatic.
Speed chart for the 3616 model, Gear Drive and Hydrostatic.
Description of the tractor's instrument panel and indicators.
Explanation of tachometer and hour meter functions and symbols.
How to read the engine coolant and fuel gauges.
Explanation of turn signal and hazard light indicators.
Meaning of glow plug, charge, and oil pressure indicator lights.
Indicates status of PTO clutch and high beam headlights.
Description of the various control switches on the dashboard.
Operation of the starter key switch positions and functions.
How to use the engine speed control lever to adjust RPM.
Operation of the lamp and hazard switches.
How to operate the turn signal switch for directional indications.
Description of control levers and pedals for different drives.
Usage of the accelerator pedal in Gear Drive models.
To Next Page
