Do you have a question about the Mahindra e Max 25 HSTs and is the answer not in the manual?
Engine Power | 24.4 HP |
---|---|
Engine Type | 3-cylinder Diesel |
Transmission | Hydrostatic |
Wheel Drive | 4WD |
Hydraulic System | Open Center |
3-Point Hitch | Category 1 |
PTO Speed | 540 RPM |
Turning Radius | 8.2 ft (2.5 m) |
Lifting Capacity | 1, 323 lbs |
Warning about chemicals in engine exhaust known to cause cancer, birth defects, or reproductive harm in California.
Explains the meaning of DANGER, WARNING, CAUTION, and IMPORTANT signs used in the manual.
Details on where to get service and how to obtain spare parts for the tractor.
Explains the origin of the word "Tractor" and its uses.
Details on the tractor's construction, engine, transmission, brakes, and hydraulics.
Explains the steering system and components of the electrical system.
Instructions for inspecting and maintaining ROPS and seat belts.
Instructions on using the seat belt with ROPS and its maintenance.
Defines DANGER, WARNING, and CAUTION signal words used in the manual.
Advises on safe driving practices to prevent rollovers.
Guidelines for performing maintenance safely.
Safety measures to prevent battery explosions.
Details the function and importance of the safety starter switch.
Safety advice related to the tractor itself, including manual reading and ROPS.
Guidelines for safe driving in various conditions and on roads.
Prohibitions and warnings for safe tractor operation.
Illustrates and explains safety decals located on the tractor's dashboard.
Overview of the tractor's dashboard instruments and switches.
Explains the functions of the key switch positions: OFF, ON, GLOW, START.
Explains the function of the hour meter, tachometer, and fuel gauge.
Details operation of hazard lights and cruise control lever.
Indicates the status of the PTO shaft based on the monitor lamp.
Instructions for operating the forward/reverse speed control pedals.
Explains the functions of the brake pedal for stopping and cruise control.
Operation and warnings for using the differential lock pedal.
Adjusting the driver's seat and the function of the safety switch.
Details on engaging the rear PTO, including speed and switch operation.
Instructions for engaging the mid PTO, including speed and switch operation.
How to raise, lower, and stop implements using the control lever.
Adjusting the lift rod to set the implement's working position.
Steps and safety checks for mounting implements, including PTO shaft.
Importance and procedure for warming up the engine before operation.
Advice on using engine braking and gears for safe downhill driving.
Precautions when checking the engine coolant, especially when hot.
Importance of correct tire pressure for tire life and performance.
Checks for steering, brakes, electrical systems, and loader connection.
Emphasizes using clean diesel fuel and keeping the tank away from dust/water.
Steps to bleed the fuel system after running out of fuel or filter replacement.
Step-by-step guide for changing the engine oil and filter.
Steps for removing, installing, and tightening the engine oil filter.
Steps for draining, flushing, and refilling the engine coolant.
Instructions for greasing the tractor based on the service schedule.
Method for adjusting brake pedal free play and ensuring balance.
Guidelines for maintaining the battery, especially in winter and during storage.
Steps for cleaning the air cleaner dust valve and element.
Instructions for checking hoses, wiring, fuses, and their replacement.
Comprehensive steps for storing the tractor for extended periods.
Overview of the cabin's conformity to standards and available systems.
Details on cabin doors and windows, including their operation.
Location and operation of front and rear working lamps.
Adjusting the cabin temperature for cooling or heating.
Checking washer fluid level and winter advisories.
Detailed specifications for the tractor's engine.
Specifications for hydraulic, hitch systems, and tractor dimensions.
Speed chart based on engine rated speed and tire type.
Tips for saving fuel through air cleaner, engine, brake, and fuel system maintenance.
Tips on fan belt tension, coolant, and leak prevention for efficiency.
Troubleshooting guide for common engine symptoms, causes, and remedies.
Troubleshooting for hydraulic lift issues and oil leaks.
Troubleshooting for battery, lights, horn, and indicator issues.
Illustrates fuse positions and provides a wiring diagram for electric instruments.