EasyManua.ls Logo

Mahindra e Max 25 HSTs - ELECTRICAL SYSTEM WIRING; Fuse Location and Wiring Diagram

Mahindra e Max 25 HSTs
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYMPTOM CAUSE REMEDY
Clutch
The clutch slips Incorrect adjustment Adjust to correct free play
Worn or burnt lining Contact dealer for repair
The clutch does not Incorrect adjustment Adjust to correct free play
disengage Rusty clutch lining Contact dealer for repai
r
Brake
Brake not working Incorrect free play worn
or burnt lining left and
right gap different
Adjust to correct free play
Contact dealer for repair
Equalize
Brake pedal not returning Faulty return spring Lack
of grease on the joints
Replace spring
Remove rust and lubricate
with grease
Hydraulic
system
Hydraulics are not lifting Engine revs. too low
Lack of transmission
Oil
Air leaking in from a pipe
Clogged suction filter
Faulty pump
Increase engine revs.
Top off the oil to the correct
level
Repair or replace pipe or
replace O ring on joint and
tighten
Clean and change oil
Faulty hydraulic valve
Faulty cylinder
Clean
and
change
oil
Contact dealer for repair
Contact dealer for repair
Contact dealer for repair
Oil leak from pipe Loose pipe joint Cracked
pipe
Tighten joint
Replace or repair pipe
When lifting the relief The stopper has slipped Adjust the stopper
valve whistles down
For any other hydraulic problems please consult your dealer who has the correct equipment to
diagnose and repair the system
81

Table of Contents

Related product manuals