■ BLEEDING THE FUEL SYSTEM
1.Fuel filter cock 「ON」
2.Open the cock on the fuel injection pump
3.Fill the tank with fuel and turn the ignition key to on.
①
Fuel Filter Cock
4.Start the engine and allow it to run for a while
5.Close the fuel injection pump cock.
6.The bleeding of the system is now finished.
■ CLEANING THE FUEL FILTER
1. Close the fuel cock.
2. Remove the fuel filter element.
②
Fuel Filter Element
3. Wash the fuel filter element in clean diesel fuel.
If necessary, replace it.
4. Fit a cleaned or new fuel filter element.
5. Open the fuel cock.
6. Bleed the fuel system
Never use petrol, thinners or any other similar flammable material to clean the
fuel filter.
Important
56
To Next Page
Loading...
