EasyManua.ls Logo

Mahindra '16' Series - User Manual

Mahindra '16' Series
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
contactus@almats.com
Click here to go on
INDEX
OPERATOR MANUAL
2816 Gear
'16' Series
Main Menu
Question and Answer IconNeed help?

Do you have a question about the Mahindra '16' Series and is the answer not in the manual?

Mahindra '16' Series Specifications

General IconGeneral
Engine TypeDiesel
No. of Reverse Gears2
Drive Type2WD
PTO RPM540
Steering TypeManual

Summary

SAFETY PRECAUTIONS

General Operating and Maintenance Safety

Basic safety precautions for operating and performing maintenance on the tractor.

Specific Safety Guidelines

Detailed safety points covering hydraulics, refueling, PTO, and steering operations.

Tractor Operation Safety Rules

Rules for starting, driving, and general operation safety of the tractor.

Safety for Specific Conditions

Safety measures for rough terrain, attachments, and enclosed operating areas.

Road Travel and Turning Safety

Safety guidelines for road travel, steering, and turning the tractor.

ROLL OVER PROTECTIVE STRUCTURE (ROPS)

ROPS FOLDING AND SECURING

Securing ROPS in Upright Position

OPERATING CONTROLS

BEFORE STARTING THE ENGINE

Pre-Start Engine Check List

Essential checks before starting the engine for operation.

NORMAL STARTING PROCEDURE

Starting Procedure Steps

Detailed steps for starting the engine.

Bypass Starting Safety

Safety precautions for bypass starting.

Post-Start Operation Notes

Important notes for operating the engine after it starts.

STOPPING THE ENGINE

COLD TEMPERATURE OPERATION

GEAR DRIVE TRANSMISSION

DIFFERENTIAL LOCK

POWER TAKEOFF (PTO)

Rear PTO Operation

How to engage and disengage the rear PTO.

Mid PTO Operation

How to engage and disengage the mid PTO.

DUAL CLUTCH SYSTEM

PTO OPERATING SAFETY

Safety for Implement Connection

Safety for hitch and drawbar implement connections.

CONNECTING IMPLEMENT TO DRAWBAR

THREE POINT HITCH SYSTEM

HITCH SYSTEM ADJUSTMENTS

HITCH OPERATION

Hitch Control Lever

Draft Control Lever

Operating with Draft Control

Hitch Lowering Speed Adjustment

Service After First 50 Hours

50-Hour Service Procedures

Engine oil, filter, transmission, front axle, and belt checks.

LUBRICATION AND FLUIDS

Lubrication Table and Recommendations

Table of oils, greases, and fluids for different applications.

SERVICE HOUR INTERVAL

Lubrication and Service Intervals Chart

Chart of maintenance intervals for various service points.

ENGINE LUBRICATION

Engine Oil Level Check

How to check the engine oil level using the dipstick.

Engine Oil Change Procedure

Steps for draining and refilling engine oil.

Engine Oil Filter Replacement

Steps for replacing the engine oil filter.

COOLING SYSTEM

Cooling System Specifications

Details on coolant capacity, thermostat, and cap pressure.

Pressure Cooling System Information

Explanation of the pressure cooling system and importance of sealing leaks.

Coolant Solution Guidelines

Recommendations for coolant types and mixtures.

Cooling System Cleaning Procedure

Steps for cleaning and flushing the cooling system.

FUEL SYSTEM

Fuel System Specifications and Water Removal

Filter service intervals and procedure for removing water from the filter cup.

Diesel Fuel Recommendations

Guidance on using the correct diesel fuel for optimal performance.

Fuel Filter Element Replacement

Steps for replacing the fuel filter element.

Fuel System Air Removal Procedure

Steps to bleed air from the fuel system.

AIR INDUCTION SYSTEM

Air Induction System Specifications

Service intervals for air cleaner components.

Dump Valve Function and Use

How to use the dump valve for dust removal.

Air Filter Element Removal and Cleaning

Procedures for removing and cleaning the air filter element.

Air Induction System Inspection

Inspecting hoses, connections, and gaskets.

TRANSMISSION & HYDRAULIC LUBRICATION

Transmission Oil Level and Change

Checking and changing transmission oil.

Hydraulic Filter Replacement Procedure

Steps for replacing the hydraulic filter.

FRONT AXLE LUBRICATION (MFD)

Front Axle Lubrication Specifications

Intervals and lubricant type for front axle.

Front Axle Oil Level and Change

Procedures for checking and changing front axle oil.

MAINTENANCE AND ADJUSTMENTS

ELECTRICAL SYSTEM

STORAGE PROCEDURES

Related product manuals