16 Series, Model - 2816 4WD
BEFORE STARTING THE ENGINE
Before starting your tractor for the first time and before each operating
period after that, make these checks:
1. Make sure all persons that operate or do maintenance on the tractor
understand that clean fuel is important.
2. Check all lubrication fittings for grease as given in the Lubrication
Chart.
3. Check the oil level in
the engine crankcase. Check the fluid level in
the transmission.
4. Check that the tractor fuel tank is filled with clean fuel that has the
specification
s given in this manual.
NOTE: Cle
an around the fuel tank cap before you remove the cap.
5. Check the fuel system
, cooling system and engine oil pan for leaks.
6. Check th
e fan belt is adjusted correctly.
7. Remove a
ny water or
sediment from the fuel filter cup.
8. Check th
e air pressure of the tires.
9. Make sure the P
TO saf
ety guard is installed.
10. Check the coolant level in the radiator and reservoir bottle. Add
water and ethy
lene glycol coolant as needed.
42
OPERATING INSTRUCTIONS
____________________________________________
To Next Page
Loading...
Need help?
General
