16 Series, Model - 2816 4WD
STEP 1
STEP 3
OFF
STEP 2
REAR PTO
LEVER
IMPORTANT: When stopping the engine after operating under heavy
load, run the engine at 1500 RPM for a short period of time. This will
allow the engine temperature to decrease gradually.
Put the REAR PTO control lever,
MID PTO control lever and the
range shift lever in the OFF or N
(neutral) position.
Move the engine speed control
lever to run engine at idle speed
for three to five minutes to
decrease the temperature of
engine.
Turn the key switch to OFF posi-
ti
on. Remove the key.
STOPPING THE ENGINE
MID PTO
LEVER
48
OPERATING INSTRUCTIONS
____________________________________________
STOP
To Next Page
Loading...
Need help?
General
