Mahindra '16' Series User Manual

16 Series, Model - 2816 4WD
Close the fuel shut-off valve.
Install new filter element. Assem-
ble filter cup and retaining nut to
filter body.
NOTE: Be sure O-ring is in
place on the filter body and filter
cup.
Clean the outside of the filter
body and cup to prevent dirt or
foreign materials from entering
the system.
Loosen the filter cup retaining
nut. Remove filter cup. Remove
old filter element and clean inside
of filter cup.
Open the fuel shut-off valve and
vent the fuel system. See Fuel
System Air removal in this
manual.
STEP 6
Clean fuel off the engine. Start
the engine to check for fuel leaks
around the filter, lines and fit-
tings.
NOTE: If the engine does not
have power with a full load after
you have done the filter service
and removed the air from the
system, see your Dealer to find
and correct the cause.
Fuel Filter Element Replacement
To replace the filter element, use following procedure:
OPEN
STEP 5
STEP 3
RETAINING NUT
STEP 2
STEP 1
CLOSE
FUEL SHUT-OFF VALVE
STEP 4
FILTER ELEMENT
103
LUBRICATION/FILTERS/FLUIDS___________________________________________

Mahindra '16' Series Specifications

General

Engine Type	Diesel
No. of Reverse Gears	2
Drive Type	2WD
PTO RPM	540
Steering Type	Manual