16 Series, Model - 2816 4WD
ROPS is a special safety unit. After an accident the ROPS must be
replaced so that you will get the same protection as a new ROPS.
ROPS, the seat, the seat belts and all the mounting, accessories and
wiring inside the operators protective area must be carefully checked
after a tractor accident and all parts with damage should be replaced
immediately. DO NOT TRY TO MAKE REPAIRS OR WELD ROPS.
Tractor Roll Over
Safety Rules
1. Do not make modifications to the ROPS. Example, welding an
accessory to the ROPS, or drilling a hole in the ROPS.
2. Special fasteners are used to install the operator protective parts.
Replacement parts must be the same as given in the Parts Catalog
for your tractor.
ROPS Label
1. ROPS is equipped with a ROPS label.
2. The label contains the ROPS serial number and applicable stand-
ards.
12
SAFETY/DECALS_______________________________________________________
To Next Page
Loading...
Need help?
General
