16 Series, Model - 2816 4WD
5. CLUTCH PEDAL – The clutch must be disengaged when starting the
engine, stopping the tractor, storing the tractor and operating the
following levers,gear shift lever, range lever, rear PTO lever, MID
PTO Lever, MFD lever creep lever.
5-1. DUAL CLUTCH
6. CLUTCH LOCK LATCH – For long term storage, lock the clutch
pedal in the disengaged position. This
will prevent the clutch disc from
sticking to the engine flywheel.
Pedal has three positions as follows:
1. Pedal completely released – Transmission and PTO engaged
2. Pedal partially releas
ed - Transmission disengaged, P
TO en-
gaged
3. Pedal completely depressed – Transmission and PTO disen-
gaged
34
INSTRUMENTS /CONTROLS ______________________________________________
To Next Page
Loading...
