Mahindra e Max 25 HSTs - ENGINE OIL FILTER AND COOLANT; CHANGING THE COOLANT

► CHANGING THE OILS IN THE TRACTOR
Always use quality oils for engine or transmission oil.
Refer to the table on pages 51 ~ 54 for the change frequency.
► CHANGING ENGINE OIL
Park tractor on a level surface, shut-off the engine and
Remove the sump plug & drain oil.
Replace and check
Remove
the
sump
plug
&
drain
oil.
Replace
and
check
the sump plug and refill the engine with oil to the correct level
on the dipstick (3.2ℓ(0.85 US gallon), max 3.8ℓ(1 US gallon).
The grade of oil to be used will depend on the ambient
temperature. See page 54.
The tractor is shipped from the factory with 10W-30.
Engine Oil Filter
Engine Oil Gauge
Engine Oil Filler
Always use the same oil as using different oils or specifications can cause damage
Always
use
the
same
oil
,
as
using
different
oils
or
specifications
can
cause
damage
.
Dispose of the old oil as per local regulations.
► CHANGING THE TRANSMISSION OIL
1. Allow the transmission oil to cool.
2. Remove the drain plug from bottom of the transmission and drain the oil.
3. Re
p
lace and check the drain
p
lu
g
.
Important
ppg
4. Refill the transmission to the correct level on the dipstick with new oil: Qty 14.5ℓ (3.83 US gal)
Always use the same grade and specified oil as Replacements.
Dispose off the old oil as per local regulations.
Important
57