Mahindra 3616 User Manual

SAFETY/DECALS
14
WARNING: Rollover protection is provided only with proper assembly. Lock pins, must be in
place. Correct parts may be obtained from your dealer.
SECOND POSITION
Remove the lock pin from the position pin.
While holding the ROPS bar CAREFULLY
remove the position pins.
Down the ROPS bar slowly from the second
position.
While holding the ROPS bar carefully install
the position pins.
Install the lock pin to the position pin.
STORED POSITION
Adjustment of Foldable ROPS.
If you feel less friction when the ROPS is
at the upright position , tighten the Lock
Nut until you feel the right friction in the
movement.
STEP6
STEP7
STEP8
STEP9
POSITION PIN
POSITION PIN
POSITION PIN
POSITION PIN
LOCK PIN
LOCK PIN
LOCK NUT

Mahindra 3616 Specifications

General

Engine Power	36 HP
Hydraulic System	Open center
Fuel Capacity	10.6 gallons
Engine Cylinders	3
Fuel Type	Diesel
Drive	4WD
Lift Capacity	2205 lbs
Hydraulic Remotes	1 (standard)
Transmission	8F/8R Synchro Shuttle
Displacement	166.7 cu in