Mahindra 3616 User Manual

SPECIFICATIONS
20
REAR POWER TAKEOFF (PTO)
PTO Type
GEAR DRIVE................................................Independent PTO
HYDROSTATIC DRIVE.................................Live PTO (Internal over running clutch)
LOCATION ................................... At the rear of transmission
ROTATION ...................................Clockwise from rear of tractor
SHAFT SIZE .................................34.9 mm (1.375 Inch) Diameter, 6Splines
SPEED .........................................540 RPM at 2376 Engine RPM
MID POWER TAKEOFF (PTO) OPTION
PTO Type
GEAR DRIVE ...................................................................Independent PTO
HYDROSTATIC DRIVE ...................................................Live PTO
LOCATION ...................................At the Bottom of Transmission
ROTATION ...................................Clockwise from rear of tractor
SHAFT SIZE .................................25.4mm (1 Inch) Diameter, 15Splines
SPEED .........................................2000 RPM at 2525 Engine RPM
DRAWBAR
TYPE ...........................................Fixed Type
DISTANCE FROM HITCH HOLE TO THE END OF PTO SHAFT
..........................................358mm (14.092 inch)
MAXIMUM VERTICAL LOAD ON DRAWBAR
..........................................440kgf (969 lbf)

Mahindra 3616 Specifications

General

Engine Power	36 HP
Hydraulic System	Open center
Fuel Capacity	10.6 gallons
Engine Cylinders	3
Fuel Type	Diesel
Drive	4WD
Lift Capacity	2205 lbs
Hydraulic Remotes	1 (standard)
Transmission	8F/8R Synchro Shuttle
Displacement	166.7 cu in