C-10
35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08
TORQUE LOADING (TIGHTENING TORQUE) CHART
Description Torque (Lbs-Ft)
Introduction
Oil Pump Screen Mounting Bolt G6.35 x 12.7 mm 6 to 8
Adapter Plate To Front Cover (5/16" 1-1/8 Size) 13 to 15
Adapter To ROSR Mounting Bolt G 7.938 (5/16" 1-1/8 ) 18 to 22
Oil Sump Adapter Mounting Bolt 5/16 UNC-2B x 2" 18 to 22
Oil Sump C/Csae Mounting Bolt 5/16-2B x 100 18 to 22
Oil Pan Drain Lug 7/8"-18 NS-2 20 to 25
Cylinder Head Sub Assembly
Injector Mounting Stud M10 12 to 14
Injector Mounting Clamp Nut M10 x 1.5 18 to 22
Water Temperature Sensor M14 x 1.5 18 to 22
Thermostat Housing Cover Bolt M8 x 1.25 x 22-H3 18 to 22
Thermostat Housing Cover Bolt With Lifting Bracket M8x30 mm Long 18 to 22
Thermostat Cover Bolt M8 x 1.25 x 22long 18 to 22
Rocker Arm Mounting Stud 12 to 14
Cylinder Head To Crankcase Mounting Bolt 7/16" UNC - Short 60 to 65
Rocker Arm Mounting On Cylinder head Bolt 7/16" UNC Long 60 to 65
Rocker Arm Mounting Nut M10 x 1.5 25 to 30
Injector Spill Pipe Banjo M6 4 to 6
Air Intake Manifold Mounting Bolt M8 x 1.25 x 45 18 to 22
Heater For Cold Start M22 x 1.5 18 to 22
Tube Oil Level Gauge 12 to 15
Exhaust Manifold Sub-assembly
Exhaust Manifold M10 x 1.5 x 45 25 to 30
High Pressure Pipes, Low Pressure Pipes
FIP High Pressure Pipe Nut Pump End M12 x 1.5 17 to 20
FIP High Pressure Pipe Nut Injector End 14 x 1.5 18 to 22
Clamps For High Pressure Pipes M6 2 to 4
Fuel Filter Mounting nut Flanged M8 x 1.25 18 to 22
Fuel Pipe Banjo Bolt M12 - on Pump Inlet 12 to 15
Fuel Pipe Banjo Bolts M14 18 to 22
Flywheel To Crankshaft Mounting bolt 7/16" UNF 60 to 70
Spin-on Lub Oil Filter 8 to 12
Valve Housing Cover Nut M10x1.5 mm 8 to 10
Hose Clip For FIP Overflow Pipe 2 to 4
Bolt Banjo M8 X1, Spill Over & Overflow Pipe 12 to 15
To Next Page
Loading...
