Name: Mahindra 4035
Brand: Mahindra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

C-45

35 Series 4WD, Model - 3535, 4035, 4535 and 5035 SM June’08

Lubrication Systems

7. INSTALLATION

a) Install the oil pump in the crankcase then tighten

the bolt to the correct torque.

b) Use liquid gasket (loctite 584) and Adapter plate.

Install the crankcase oil pan, tightening the bolts

to the correct torque.

c) Fill the crankcase with the correct grade of

lubricating oil to the oil level mark on the dipstick.

8. LUBRICATING OIL FILTERS

1. REMOVAL

a) Unscrew the spin-on oil filter from filter head and

install new filter.

NOTE: Engine Oil and filter element must be changed

after every 200 hours of engine operation.

b) Service Schedule :

For new tractor and overhauled engine first service

- Oil filter replacement after 200 hrs.

It is highly detrimental to engine reliability,

if cartridge is reused by reflushing with cleaning

solvent. Dispose off immediately.

Engine Oil Filter

Other manuals for Mahindra 4035

Questions and Answers:

Need help?

Do you have a question about the Mahindra 4035 and is the answer not in the manual?

General