12
A.Lift the implement.
B.Depress the clutch pedal, put the gear shifting lever into the desired lower gear, release
the parking brake lock pawl of the brake pedal.
C.Observe the environment to confirm that there are no obstructions on the road and
sound the horn to call attention to the people.
D. Increase the engine speed gradually and simultaneously release clutch pedal so as to
make the tractor start off smoothly
.
3) Operating the tractor
A.During operation make sure that readings on gauges are normal.
B.It is prohibited for operator to place his foot on clutch pedal so as to protect clutch from
beingdamaged because of semi-engaged condition of clutch.
C. In transportation or running on highway, lock the left and the right brake pedals
together with brake lock plate.
D. In field operation, one-side braking can be used to reduce turning radius, but it is
prohibited to use one-side braking for sharp turning when the tractor is running at high
speed or is used for transportation on highway, so as to prevent overturning and protect
components from being damaged.
E. Proper speed should be selected to get best productivity. Table 2-3 shows the speeds
for various operations.
Table 2-3 Speeds for different operations
Operation Gear
Creeper Ditching
L1st Rotary cultivation
L2nd Rotary cultivation, transportation
L3rd Ploughing, harrowing, drilling
H1st Ploughing, harrowing, drilling
H2nd Transportation
H3rd Transportation
R1st To attach implements
R2nd To attach implements
To Next Page
Loading...
Need help?
General