MAHLE ArcticPro 200yf User Manual

ArcticPro 200yf
en Quick manual
D Before connecting service hoses proceed as follows:
1. Verify that the oil system type matches between the actual vehicle A/C system and current configuration of the ACS unit
(PAG or POE). If required change oil type in “Settings >> A/C Service Parameters” (see operating instructions chapter 4.4).
2. Perform refrigerant identification (see operating instructions chapter 6.3).
D Use of a refrigerant identifier reduces the risk of contamination of ArcticPro 200yf. If the service hoses are connected to the vehicle
before refrigerant identification there is the risk for contamination of the refrigerant system of ArcticPro 200yf. The contamination in
the ArcticPro 200yf can only be removed by a service provider at additional cost.
1. Menu overview
Menu level 1
Menu level 2 Menu level 3 Menu level 4
Vehicle A/C Service
Automatic A/C Service
Direct parameter input
From vehicle database
From last 10 vehicles
Manual A/C Service
Recovery
Vacuum creation
Recharge oil
Recharge UV dye
Recharge R1234yf
A/C system flushing
Short flushing
Extended Flushing
Refrigerant Identification
Maintenance Internal bottle fill
Hose Drain
System leak test
Service report Last 3 system service reports
Self test report
R1234yf report
Error report
Statistics Operating hour meter
Filter drier life
Vacuum pump oil life
Maintenance Self test
Calibration Scale calibration
Tare Reset
R1234yf calibration check
Firmware update
Settings General settings Languages
Date and Time
Workshop Data
System settings Printer
Workshop details on printout
Buzzer
Operator list
Maximum service data records
A/C Service Parameters PAG oil
POE oil
My database
Reset factory settings

MAHLE ArcticPro 200yf Specifications

General

Brand	MAHLE
Model	ArcticPro 200yf
Category	Industrial Equipment
Language	English

Summary

Menu Overview and Navigation

Vehicle A/C Service Options

Covers automated and manual services for vehicle air conditioning systems.

A/C System Flushing Procedures

Details on performing short and extended flushing of the A/C system.

Maintenance and Diagnostics

Procedures for unit maintenance, leak testing, and service reporting.

Refrigerant Identification

Essential step to identify refrigerant type before service to prevent contamination.

Unit Settings and Configuration

Covers general settings, A/C service parameters, and factory resets.

Selection and Function Keys

Key Functions and Operations

Defines the purpose and operation of each key on the ArcticPro 200yf control panel.

Refrigerant Analysis and Verification

Refrigerant Analysis Procedure

Steps for performing refrigerant analysis before connecting service hoses.

Refrigerant Verification Process

Procedure for verifying refrigerant quality using an external R1234yf bottle.